HPLC Column Agilent Zorbax 150 x 4.6 mm ID

A like new HPLC column by Agilent. model Zorbax 300 StableBond-C18. The column features 4.6mm internal diameter. 150mm column length and 300A pore size. The following information is available from the manufacturer: ZORBAX 300StableBond columns are an ideal choice for the reproducible separations of proteins and peptides for two key reasons. First. wide-pore. 300Å columns are necessary for an efficient separation of proteins and peptides. or other large molecules. in order to allow these analytes to completely access the bonded phase. Second. 300StableBond columns are unmatched in their durability at low pH. such as with the TFA containing mobile phases typically used for protein and peptide separations. For LC/MS separations at low pH. 300StableBond columns can also be used with formic acid and acetic acid mobile phase modifiers. Zorbax 300StableBond columns are available in four different bonded phases (C18. C8. C3. and CN) for selectivity and recovery optimization of proteins and polypeptides. To further increase sample recovery and improve efficiency for difficult proteins. 300StableBond columns can be used up to 80-90°C. 300SB-C18 and 300SB-C8 columns are an ideal choice for complex protein and protein digest separations. These columns are available in capillary (0.3. 0.5 mm ID) and nano (0.075 and 0.10 mm ID) dimensions for reversed-phase LC/MS separations of these protein digests. These capillary and nano columns can be used for either 1-D or 2-D proteomics separations. ZORBAX StableBond 300SB Column Specifications Bonded Phase Pore Size Surface Area Temp Limits* pH Range* End capped Carbon Load ZORBAX 300SB-C18 300A 45 m²/g 90°C 1.0 - 8.0 No 2.8%If you are not satisfied with the product. it may be returned within 3 days of receipt with a full refund minus shipping expenses.